FUJI traction freight elevator
FUJI traction freight elevators are the muscle behind smooth, reliable vertical transport. They use strong steel ropes and a counterweight system to lift heavy goods-no shaky movements, no sudden drops. Just steady, controlled lifting power.
Built tough for factories, warehouses, and large commercial spaces, traction freight elevator handles tons of weight with ease. They save time, reduce worker strain, and cut down on accidents. Plus, they last for years with minimal maintenance.
Why choose traction over hydraulic? Better energy efficiency, quieter operation, and higher speeds. Perfect for busy workplaces where every second counts.
How do traction freight elevators differ from hydraulic ones?
The main differences are in how they're powered and where they're best used.
Traction freight elevators:
● Use steel ropes and traction machines, with a counterweight to balance things out.
● Good for mid to high-rise buildings, moving at decent speeds (0.25~1.0 m/s).
● Gave energy, cost less to run, and need little maintenance.
● Need less space (machine-room-less designs save even more)
Hydraulic freight elevator:
● Powered by hydraulic cylinders.
● Better for low-rise buildings.
● Run smoothly but slowly (0.1-0.3 m/s).
● Cost less initially but use more energy over time.
● Need a hydraulic pump station, taking up more room.
1. What's the load capacity of a traction freight elevator?
From 500 kg to 5000 kg.
● Small freight elevators (500-1000 kg): good for light goods, like in restaurants, supermarkets, or small warehouses.
● Medium-sized ones (2000-3000 kg): work in factories and logistics centers.
● Heavy-duty elevators (over 3000 kg): for big industrial places, like car making or heavy machinery transport.
The load capacity depends on the car size, the number of ropes, the traction machine's power, and the guide rails' strength.
2. How much space does a traction freight elevator need in the hoistway?
It depends on the car size and rated load.
A standard 1000 kg freight elevator usually needs about 2000 mm (width) x 2500 mm (depth) in the hoistway.
● The net car size should fit the goods and how they're loaded/unloaded.
● Width should be 300~500 mm wider than the biggest good.
● Depth 500~800 mm longer.
● Top headroom should be at least 1200 mm higher than the car height.
● Pit depth 800~1500 mm.
Goods with special sizes might need a custom hoistway design.
In tight spaces, consider machine-room-less designs or small hoistway solutions, but they might cost more and limit future upgrades.
3. What's the speed of a traction freight elevator?
0.25 m/s to 1.0 m/s.
● High-speed models can go over 1.5 m/s, but they need a stronger driving system and precise controls.
It depends on the building height and how often it's used:
● For low-rise buildings (2-5 stories): 0.5 m/s is enough.
● For mid to high-rise buildings (6-15 stories): 0.75-1.0 m/s is recommended.
● For buildings over 15 stories: consider high-speed elevators over 1.0 m/s.
Freight elevators usually move slower than passenger ones because safety and stability matter more.
4. What info do you need to customize a freight elevator with non-standard sizes?
FUJI elevator very good at providing customization services!
Please prepare the following information:
● Hoistway size: including net width/depth, door opening size, pit depth, and top headroom (on-site photos would be better).
Usage requirements:
● Maximum load capacity (consider impact loads)
● Size of frequently transported goods (such as pallet specifications)
● Whether special doors are needed (rolling doors, double doors, etc.)
Power supply conditions: 380V/50Hz is the standard configuration. If the local voltage is different, please specify in advance.
5. Is traction freight elevator suitable for outdoor installation?
Yes, but additional protective measures are required.
Outdoor traction freight elevators need to have:
● Waterproof design: The control cabinet and guide rails should have an IP54 or higher protection rating.
● Rust-proof treatment: Stainless steel car or galvanized steel structure.
● Temperature adaptation: In areas with extreme climates (such as high temperatures or severe cold), an oil temperature regulation system or electric heating devices should be equipped.
● Windproof measures: Windproof fences should be installed for open hoistways.
Traction Freight Elevator Construction Layout Drawing
Hot Tags: fuji traction freight elevator, China fuji traction freight elevator manufacturers, suppliers, factory, 3 folded Center Opening FUJI Freight Elevator, Center Opening Freight Elevator, Double folded Center Opening FUJI Freight Elevator, Freight Elevator, Side Opening Freight Elevator
